This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. All gate hardware shall be of sufficient strength and durability to support the gate and repeated open-close cycles. Gate hinges shall be structurally capable of supporting the gate leaf and allow the gate to open and close without binding. Single gate latch shall be capable of retaining the gate in a closed position and shall have provision for a padlock. Double gate latch shall be a drop rod or plunger bar arranged to engage the gate stop. Locking devices shall be constructed so that the center drop rod or plunger bar cannot be raised when the gate is locked. The latching devices shall have provision for a padlock. Gate stops shall be provided for all double gates and shall be suitable for setting in concrete for the center drop rod or plunger. Gate keepers shall consist of a mechanical device for securing the free end of the gate when in full open position. This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. 1. Scope 1.1 This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. 2. Referenced Documents (purchase separately) ASTM Standards A780 Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings F1043 Specification for Strength and Protective Coatings on Metal Industrial Chain Link Fence Framework F1083 Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures F2200 Specification for Automated Vehicular Gate Construction Index Terms drop rod; gate leaf; hinges; keepers; latch; plunger; polymer; truss rods; ICS Code ICS Number Code 91.060.50 (Doors and windows) DOI: 10.1520/F0900-11 ASTM International is a member of CrossRef.

Warmly congratulate China ? Gao Zhapa Valve Manufacturing Co., Ltd. to become the governing unit of Wenzhou Valve Association

Our company has obtained ISO9000:2008 Management System certificate,special equipment manufacturing license(TS certificate),ball valve TS certificate,gate valve TS certificate,butterfly valve TS certificate,stop valve TS certificate,check valve TS certificate,foreign trade operator recording registration form,governing unit of Wenzhou Valve Association,wide ball valve new type patent certificate(patent NO:ZL 2011 201120100188.7 NO:ZL 2011 20100502.3).Please visit the Enterprise Qualification link on our website...

Hitting up ICUEE this year? Don’t skip the McLaughlin booth (Lot Area K-120)

The utility industry’s biggest show — The International Construction and Utility Equipment Exposition (ICUEE) is just around the corner. The show will take over the Kentucky Exposition Center in Louisville October 3 through 5, and our team has been hard at work preparing for the event during the past few months. With over 1 million square feet of exhibition space, there is no shortage of equipment to see at ICUEE. But there are a few reasons why you shouldn’t skip the McLaughlin booth. Get a...

Ningbo Jiaming Metal Products Co., Ltd was founded in 1987

NINGBO JIAMING METAL PRODUCTS CO.,LTD was founded in 1987. It is located in Hangzhouwan New Zone- on the southern seashore of Hangzhou Bay in the east of China.Our companys registered capital is US Dollar 12Million. It covers an area of 80,000 square meters and has two subsidiaries named NINGBO JIAMING JINCI GAS VALVE CO.,LTD AND NINGBO JIAMING GAS EQUIPMENT CO.,LTD.

Chemical Systems Services' Backdraft Dampers Include Butterfly, Gravity and Blast Gate Types

Chemical Systems Services, Inc. (CSSI) is introducing a standard line of PVC and CPVC duct dampers offered in butterfly, gravity, and blast gate types in a wide range of sizes for fume removal applications. CSSI Backdraft Dampers come in three flow control types: butterfly for balancing airflow, a gravity backflow preventer which closes when the air pressure stops, and a blast gate for on/off where space constraints exist. Ideally suited for handling corrosive fumes, they are offered in PVC or CPVC construction...

The audaciousness of hope: reasons for optimism at the Ceres conference 2012

Let me ‘fess up. The state of the environment sometimes gets me down. But to be fair, Earth’s vital signs would drive any respectable emergency room doctor into a state of utter panic. Globally, two thirds of ecosystem services, such as freshwater, pollination, natural hazard regulation, have been degraded in the past 50 years. Annual rates of growth in yields of many basic crops have declined over the past 20 years. The effects of global climate change are already being felt around the world. But...

No comments were found for ASTM F900 - 11 Standard Specification for Industrial and Commercial Swing Gates. Be the first to comment!

Environmental XPRT is a global environmental industry marketplace and information resource. Online product catalogs, news, articles, events, publications & more.

Environmental XPRT is part of XPRT Media All Rights Reserved. Terms Privacy

Our sites: Agriculture XPRT Energy XPRT Medical XPRT XPRT