PP PE rigid flakes bottle recyling pelletizing machine(800-1000kg/h),This is mainly used for PP PE film and rigid or hard crushed material is also possible, it is specially designed for feeding squeezed material, waste dirty material after washed and dried.

Two stage machine with two screen changer, so that it can fliter much more impurity. Meanwhile the machine with one vacuum degassing and one natural degassing, then the final pellets will be more beautiful. The machine is with high performance and high efficiency, 

Screw is designed with differennt type for different, and the heater also can use Cost Aluminium, cost copper, alloy, keramic or others.

Side feeder with mixer, material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder
Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 300kg/h
4. Material come out more stably: material go through from the first stage to the second stage, with two screen changer, much more impurity will be filterd and the material come out from the die won't broken down.
5. Beautiful pellets: two degassing system, no air in the pellets.
6. The machine wih long life.

Rotary charger
Send the material into the feeder equally, it is controlled by inverter. inverter brand can be customized, ABB, SIEMENS, or other brands

 Feeder(material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder)

The first stage of machine(After force feeder, the material will be send to the first stage, with extrusion and first screen changer, the material will go to the second stage) Materil come to the second stage directly

Screen changer of the first stage. There are several kinds of screen changer. 
Special design board (no-stopping screen change,no leak),
Changing time ≤2  seconds,
Motor power: 2.2kW.
Systemic pressure: 16Mpa
Material : 38CrMoAl
Screen changer system mould material is
38CrMoAl, nitrogen treatment surface

Material come from the first stage to the second stage(there is one natural degassing on here)

One vacuum degassing on the first stage and one natural degassing between the first stage and second stage

Second stage of the  machine
Gear box:high torque,low noise,external connect with cooling system,Brand: GUOMAO(The most famous in China)
Heating and cooling of each section: electric heaters and fans.
Screw: SACM-645,nitride treatment;
Barrel: SACM-645, nitride treatment, honed polished;
Drive power:AC motor(00kW);Siemens Beide motor with Siemens inverter
Screw diameter:200mm;one vacuum degassing which contact the first stage and second stage
L/D:10 :1;
Heating and cooling of each section: electric heaters and fans.
Lubrication:forced lubricating, with filter and oil-water cooler ;
Barrel heated in 4 compartments

Water-ring pelletizing system
Water-ring granulation motor power 2.2kW.(SIEMENS INVERTER CONTROLLED)
Horizontal die face cutting system 
Containing:hot cutting die head,diffluence strick,water-ring cover,knife rest,cutterhead,toolbar.
SUS304 Stainless steel, thickness: 2.5mm.
Water cooling pump for circulation, power: 3kW
Cutting blades: 4 pieces

See the whole line of the machine(rotary charger ---feeder ----The first stage extruder----screen changer---Second stage extruder----Second screen changer----Water-ring pelletizing system----Chute----Centrifugal dryer---blower---silo)


Material test by the machine and final pellets(crushed PE milk bottles)


Pameter of such kinds of machine

 

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468