TV Cable Extrusion Line Extruding Machine for Wire and Cable

QF-65+35 Physical Foaming Extrusion Line 1. ApplicationPhysical foaming cable extruding machine apply for extruding low loss core wire of all kinds of coaxial cable ,such as single layer , dual layer insulating core-wire (F/ S) for communication cables, such as HDMI, Display Port, IEEE1394, DVI,VGA, ATA etc.Coaxial cable pr

Featured Products

QF-65+35 Physical Foaming Extrusion Line
 
1. Application
Physical foaming cable extruding machine apply for extruding low loss core wire of all kinds of coaxial cable ,such as single layer , dual layer insulating core-wire (F/ S) for communication cables, such as HDMI, Display Port, IEEE1394, DVI,VGA, ATA etc.
Coaxial cable production process:
(1).Physical foam extrusion line for making PE foaming insulation coaxial wire
(2).Braiding machine for doing the braiding wire and tapping the al foil on the coaxial wire
(3).PVC extrusion line for sheathing the coaxial cable with PVC plastic.


2. Main Technical Parameter:
2.1 Inlet wire diameter: 0.8-4.0MM;
2.2 Finished diameter: 3.5-10.0MM;
2.3 Output capacity: 120 kg/hr (open the crosshead)
2.4 Line speed: Max 300 m/min (according wire specification).
2.5 Diameter control: wire diameter precision control±0.03, via diameter gauge control.
2.6 Foaming degree: (1) High pressure Max :Foam PE 78%
                                     (2) Low pressure Max: Foam PE 50%
2.7 Gas pressure: 0.4Mpa, 15M3/Hr.
2.8 Wire tension: 0.5KG-3.5KG
2.9 Foam medium: high purity nitrogen(N2: 99%)
2.10 Water: 2m3/hr(Recycle and reuse, but should change once every 6 months)
2.11 All the pulley are proceed of anodized hardness treatment.
2.12Operation Direction: Either left or right (or buyer appoints).
2.13 Power supply: 380V, 3phase, 50 Hz, 5 wires.
TV Cable Extrusion Line Extruding Machine for Wire and Cable

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours