Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling

 Co-rotating Twin Screw Extruder granulator for Waste Pet bottles flakes recycling, PET cans and so on. The machine with High-torque twin-screw extruding screw unit, this  is a new-generation high-speed, high-torque and high-power twin screw extruder realizing technological promotion based on the existing pro

Featured Products

 

Co-rotating Twin Screw Extruder granulator for Waste Pet bottles flakes recycling, PET cans and so on. The machine with High-torque twin-screw extruding screw unit, this  is a new-generation high-speed, high-torque and high-power twin screw extruder realizing technological promotion based on the existing product by drawing experience from the advanced manufacturing technology in China.

 


The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. This machine can carry out ideal viscosity of PET without complicated precystallization dryer system. Only a bit IV will be reduced. It can improve IV in the condition of adding some suitable additive.
5. The machine wih long life.


other type of these kinds of machine

Model

TSSK20

TSSK30

TSSK35

TSSK50

TSSK65

TSSK72

TSSK92

Screw diameter(mm)

21.7

30

35.6

50.5

62.4

71.2

91

Rotary speed(rpm)

600

400

400/600

500/600

400/500

400/500

400/500

Main motor power(kw)

4

11

11/15

37/45

55/75

90/110

220/250

L/D

32-40

28-48

32-48

32-48

32-48

32-48

32-40

Capacity(kg/h)

2-10

5-30

10-80

20-150

100-300

300-600

600-1000

More machine photoes
Feeder the material into the extruder: single screw feeder, the material will be feeded equally and without blocking
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
Vacuum pump for the machine, we can use roots vacuum and double stage pump. different vacuum pump the fuction is the same.
 
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
The extruder is cooling by water, Itlay electric valve control the water. 

Liquid-Ring Vacuum Pump
Suction capacity: max. 24M3/hr
Power: 3kW
Display the No on the vacuum zone:<0.1Mpa(-1bar)
Forcee pump:water ring pump 2SK-1,5, motor power:4kw, suction speed:1.5m3/min,max pressure 6.7 X 103Pa
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
The material come out from the die(pull trap like noodles pelletizing way, PET must use this pelletizing way. And the its need good vacuum, like roots pump, then the pellets will be much better)

Screen changer is Special design board (no-stopping screen change,no leak),
Changing time ≤2  seconds,
Motor power: 2.2kW.
Systemic pressure: 16Mpa
Material : 38CrMoAl
Screen changer system mould material is
38CrMoAl, nitrogen treatment surface
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
Cooling for the screw( water controlled by electric valves)
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling

Screw elements of the machine


Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
Final pellets of PET
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
The machine line
Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
If you need  more details of this kind of machine kindly contact me, I can send you more detail photoes and  vedios.


Co-Rotating Twin Screw Extruder Granulator for Waste Pet Bottles Flakes Recycling
1. We supply below necessary documents with the machine:

  1. Machine layout
  2. Electricity diagram
  3. Machine certificate
  4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. 
We trust that our quotation meets with your requirements and we will gladly furnish you with further information.


  
                              

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours