3D Printing Webinar and Event Roundup: October 9, 2022
3D Printing News Briefs, October 8, 2022: Sales Reps, Robotic 3D Printer, & More
New Acquisition Gives Lithoz Three Ceramics 3D Printing Technologies
Post-Processing for Additive Manufacturing: Market Analysis and Forecast
Post-Processing for Additive Manufacturing: Market Analysis and Forecast
Market for Bound Metal Additive Manufacturing 2022
Polymer Parts Produced 2022: Global Market Data & Forecast
Dig Deeper, Search Our Message Board 3dprintboard.com
Applications Engineer - Metal Printing
Senior Additive Manufacturing Project Engineer
Feature Your Job Posting Here
A curated collection of industry and product deep-dives.
Videos, podcasts, product reviews and free downloadable resources.
3D Printing Webinar and Event Roundup: October 9, 2022
3D Printing News Briefs, October 8, 2022: Sales Reps, Robotic 3D Printer, & More
New Acquisition Gives Lithoz Three Ceramics 3D Printing Technologies
3D Printing Webinar and Event Roundup: October 9, 2022
3D Printing News Briefs, October 8, 2022: Sales Reps, Robotic 3D Printer, & More
New Acquisition Gives Lithoz Three Ceramics 3D Printing Technologies
Austria’s Lithoz is adding to its ceramic 3D printing portfolio though the acquisition of CerAMing, a German startup that has pioneered a process it calls layer-wise slurry disposition (LSD). The new asset is said to fill out the variety of offerings that Lithoz has, giving it a third, novel method for additive manufacturing (AM) with ceramics.
CerAMing began in the StartupSlingshot program of BAM (Bundesanstalt für Materialforschung und -prüfung/German Federal Institute for Materials Research and Testing), from which is subsequently spun off. Its LSD technology is a binder jetting technique that produces highly dense components and allows for wider geometries than similar methods because green state parts tend to be tougher, allowing for more delicate parts or parts with greater overhangs.
The LSD system from CerAMing. Image courtesy of CerAMing.
LSD will complement Lithoz’s existing ceramic slurry 3D printing technologies, LCM and LIS. LIS involves the deposition of slurry onto a build plate, which is then selectively dried by a laser. The build is subsequently raised removing the slurry. Meanwhile, Lithoz’s erstwhile mainstay, LCM, is a vat photopolymerization technique, in which a digital projector is cast onto ceramic slurry. The green part is then debound and sintered.
The LSD process from CerAMing. Image courtesy of CerAMing.
Lithoz may have just missed its chance to acquire Admatec, purchased by Nano Dimension this past July. Perhaps the firm wants to expand into tooling, in the manner of Mantle. With LCM for small components at high resolution and LIS for large parts, Lithoz may have been looking for a Goldilocks type technology to round out its offering. Another possibility is that they no longer want to be wholly dependent on optics from Scanlab. Perhaps, for line-based, highly productive set-ups, a binder jetting approach would give them more productivity and lower cost per part. Lithoz CEO Dr. Johannes Homa provided just a bit of clarity:
“With the acquisition of CerAMing, Lithoz is expanding its technology portfolio through strategic acquisition for the first time. We see this technology as another key pillar in the realization of our vision to enable geographically independent, yet fully digitally connected global serial production in the ceramics industry. We have already been able to realize this with our market-leading LCM technology, and along with LIS technology we will soon also be able to further our goals with LSD printing as complementary technologies with the same high quality and without compromising on results.”
Either way the Viennese firm is definitely not straying from ceramics. Ceramics have always been the once and future king of 3D printing. According to the Ceramics Additive Manufacturing Part Production: 2019-2030 report from SmarTech Analysis, the ceramics AM market will reach an estimated $4.8 billion in revenue by 2030. Many of the materials offer excellent strength, chemical resistance, heat resistance and more.
However, ceramic 3D printing has been finicky to implement. In traditional manufacturing, the materials are expensive and prone to long processing times. With AM, progress has been painfully slow. It is today difficult to get ceramic parts made when compared to metal or polymer parts. Services are limited in their use of ceramics processes. Adoption by industry has also been slower than expected.
XJet is Israel’s offering, along with Nano Dimension’s Admatec. Nanoe is an exciting offering, democratizing ceramics by offering it on material extrusion printers. However, I would have expected Markforged to get into ceramics long ago because they have an analogous bound metal technology and sintering, as well as debinding equipment. BASF, too, could pursue ceramics but has focused on 316L steel and other materials instead.
If there were to be greater investments and commercialization of ceramic 3D printing, there are breakthrough applications waiting for the world. Until then, ceramics will be always a bridesmaid and never a bride—except, of course, for the polyamorous Viennese at Lithoz.
Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.
3D Printing Webinar and Event Roundup: October 9, 2022
3D Printing News Briefs, October 8, 2022: Sales Reps, Robotic 3D Printer, & More
For years, Germany’s Evonik has been one of the largest suppliers of materials for additive manufacturing (AM), reigning supreme in polymers for powder bed fusion (PBF). Among them is its...
In today’s 3D Printing News Briefs, we’ll start with software, as Siemens embeds the 3Dfindit.com parts library by CADENAS into its Capital software. Onto metal news now, as research out...
In 2022, numerous developments seem to be signaling that metal additive manufacturing (AM) has entered a new era in its history. One company epitomizing this trajectory is Australia’s SPEE3D, which...
French biotech startup Poietis will install its high-resolution Next-Generation Bioprinting (NGB)-C robotic platform at a GMP (Good Manufacturing Practice)-compliant bioprinting plant located at the University of Barcelona (UB) ‘s Production...
Upload your 3D Models and get them printed quickly and efficiently.
A Half-Day Online Summit Focused on 3D Printing Market Activity, November 10, 2022
Networking & Intelligence Summit, February 7-9, 2023
3D Printing jobs around the world.
Subscribe to Our Email Newsletter
© 2016 - 2022 3DR HOLDINGS. ALL RIGHTS RESERVED.
Register to view and download proprietary industry data from SmarTech and 3DPrint.com Questions? Contact info@3dprint.com